Hunter 28803 52 Orchard Park Bedienungsanleitung

Type 5 ModelsType 5 ModelsType 5 ModelsFor Your Records andWarranty AssistanceFor reference, also attach your receipt or a copyof your receipt to the

1042207-01 • 01/30/14 • Hunter Fan Company5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.5-2. Raise the can

1142207-01 • 01/30/14 • Hunter Fan Company6 • Assembling the BladesSteps 6-1 – 6-3Hunter fans use several styles of fan blade irons (brackets that

1242207-01 • 01/30/14 • Hunter Fan Company7-2. read the plug connector from the mounting plate through the gasket. Partially install the gasket

1342207-01 • 01/30/14 • Hunter Fan CompanyTo Change Airflow DirectionTurn the fan o and let it come to a complete stop. Pull the reversing switch

1442207-01 • 01/30/14 • Hunter Fan CompanyProblem: Nothing happens; fan does not move.1. Turn power on, replace fuse, or reset breaker.2. Loosen

242207-01 • 01/30/14 • Hunter Fan CompanyWelcomeYour new Hunter® ceiling fan is an addition to your home or oce that will provide comfort and per

342207-01 • 01/30/14 • Hunter Fan CompanyStep 1 - Choose the Fan SiteProper ceiling fan location and attachment to the building structure are esse

442207-01 • 01/30/14 • Hunter Fan CompanyPreparing the Fan Site (continued) CAUTION: All wiring must be in accordance with national and local elec

542207-01 • 01/30/14 • Hunter Fan CompanyInstaller’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice®Hunter’s patente

642207-01 • 01/30/14 • Hunter Fan CompanyTo install a ceiling fan, be sure you can do the following:• Locate the ceiling joist or other suitable s

742207-01 • 01/30/14 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning

842207-01 • 01/30/14 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions.3-1. Unbundle t

942207-01 • 01/30/14 • Hunter Fan Company4 • Wiring the FanWire ConnectorAll wiring must be in accordance with national and local electrical code